Philips CUCINA HR7633 - Handbuch (Seite 8)

ENGLISH 8
each other.The projection of the lid will
now cover the opening of the handle.
Feed tube and pusher
C
1 Use the feed tube to add liquid ingredients
and/or solid ingredients. Use the pusher to
push ingredients down the feed tube.
C
2 You can also use the pusher to close the
feed tube in order to prevent ingredients
from escaping through the feed tube.
Blade
◗ The blade can be used for chopping, mixing,
blending, pureeing and preparing cake
mixtures.
C
1 Put the bowl on the motor unit.
C
2 Remove the protective cover from the
blade.
The cutting edges of the blade are very sharp
Avoid touching them!
1
2
CLICK
C
3 Put the blade on the tool holder.
C
4 Put the tool holder in the bowl.
5 Put the ingredients in the bowl. Pre-cut
large pieces of food into pieces of approx.
3 x 3 cm. Put the lid on the bowl.
C
6 The buttons allow you to adjust the speed
of the appliance to obtain optimal results.
B 'PULSE/0' button: for pulse operation and for
turning the appliance off. If the 'PULSE / 0' button
is pressed, the appliance runs at the highest
speed.The appliance stops running when the
button is released.
B button 1: for normal speed.
B button 2: for high speed.
See the table for the recommended speeds.
Processing takes 10 - 60 seconds.
Tips
◗ The appliance chops very quickly. Use the
pulse function for short periods at a time, to
prevent the food from becoming too finely
chopped.
◗ Do not let the appliance run too long when
you are chopping (hard) cheese.The cheese
will get too hot and will start to melt and
become lumpy.