Burkert Type 4040 - Handbuch (Seite 24)

22 - 4040
english
Definitions and Abbreviations of Values Used
- Process data can be displayed during normal operations.
- Configuration data (data pertaining to the system):
==> System is OFF
==> Include recipe and calibration data
- Parameter data (data pertaining to the control loop): ==> System ON/OFF
The data areas must be stored contiguously (stop and start word)
Abbrevia-
tion Display
(6 charac-
ters maxi-
mum) Description In module Meaning
Default value
Value range
Unit Recipe datum Process datum Parameter datum Calibration datum
Recipe_no. Rec. no Number of recipe Enter recipe 1 1-9 yes
Product Product Product to be
conveyed Enter recipe Designation of the product
as text - 16 characters yes
Feed_way Feed_way Conveying line Enter recipe Designation of the con-
veying line as text - 16 characters yes
Lock Lock Name of the lock Enter recipe Designation of the lock
as text - 16 characters yes
Empty_run Empty run Stop with or
without empty run Enter recipe Differentiation: with or
without empty run 0 0: without e.r.
1: with e.r. yes
vE vE Speed in con-
veying line AUTO conveyance Target conveying speed
after lock 0 0-40.0 m/s yes
vL vL Empty-run speed STOP with empty run Target speed during empty
run 0 0-40.0 m/s yes
tvE tvE Time needed to
reach vE AUTO conveyance for start function
v0=(vE/tvE)*t 30 1-30 s yes
tvL tvL Time needed to
reach vL STOP with empty run for empty-run function
v0= vE + (vL-vE)/tvL*t,
0<t<tvL 30 1-30 s yes
pmin pmin min. conveying
pressure AUTO conveyance
STOP without empty run
STOP with empty run lowest permissable con-
veying pressure during
media conveyance 0 0-10.00 bar yes
pmax pmax max. conveying
pressure AUTO conveyance
STOP without empty run
STOP with empty run highest permissable
conveying pressure during
media conveyance 6 0-10.00 bar yes
D D Diameter of pipe
before and after
lock AUTO conveyance
STOP without empty run
STOP with empty run for the calculation of Q or v 50 5-355 mm yes
O
PERATION