Commissioning, operation – WIKA A-IAI-1 Benutzerhandbuch
Seite 15
GB
WIKA operating instructions attachable indicator model A-AI-1
15
2018357.06 08/2012 GB/D
Key 1
Key 3
Key 2
6. Commissioning, operation
Once the cover has been removed, to configure the instrument continue as
follows:
■
To access the menu, while the actual value is displayed, press key 2 for 2
seconds until "dP" appears in the display.
■
To set the parameter values, press keys 2 and 3.
■
To save the set value, press key 1. The parameter name will then appear in
the display once more.
■
To get to the next parameter to change, press key 1. The name of the
parameter will appear in the display.
If, during input, no key is pressed for 60 seconds, the configu-
ration of the instrument will be interrupted. Previously-saved
values will not be lost.
6.3 Configuration of the display
To configure the instrument, the cover must first be carefully removed, in
order that the keys behind it can be reached. To do this, the four screws on
the corners of the case must be removed.
Operating keys
Key 1:
Calling menu options and saving settings
Key 2:
Increasing the parameter values
Key 3:
Decreasing the parameter values