WIKA A-IAI-1 - Handbuch (Seite 20)

GB
WIKA operating instructions attachable indicator model A-AI-1 20
2018357.06 08/2012 GB/D
8. Faults / 9. Dismounting, return and disposal
CAUTION!
If faults cannot be eliminated by means of the measures listed
above, the attachable indicator must be shut down immedi-
ately, and it must be ensured that signal is no longer present,
and it must be prevented from being inadvertently put back into
service.
In this case, contact the manufacturer.
If a return is needed, follow the instructions given in chapter
9.2 "Returns".
9. Dismounting, return and disposal
WARNING!
Residual media in dismounted instruments can result in a risk
to persons, the environment and equipment.
Take sufficient precautionary measures.
9.1 Dismounting
First disconnect the power supply, then loosen the angle screw, with which
the angular connector, attachable indicator and transmitter are connected.
Remove the plug and the attachable indicator. Then replace the angular
connector onto the transmitter and secure it. For this, use the screw originally
supplied with the transmitter, it is shorter.
9.2 Returns
WARNING!
Strictly observe the following when shipping the attach-
able indicator:
All instruments delivered to WIKA must be free from any kind of
hazardous substances (acids, leachate, solutions, etc.).
When returning the instrument, use the original packaging or a suitable
transport package.