Lenze PCM 310 PCMatic Slot Controller - Handbuch (Seite 44)


‚
42
2.3. PCMatic
®
-Shuttlebox
PCMatic
®
-Shuttlebox
2.3.1. Run/Stop switch
This switch has 2 settings. If the switch is set to the RUN position, the PLC program on the card is
started. In this position, it is also possible to initiate a program stop and restart by using the
programming device.
2.3.2. Reset button
This initiates a reset of the PCMatic
®
card. This reset also deletes the current content of the program
memory of the PLC, i.e. an PLC program must be reloaded on to the card. If it is desired to reset only
the Fieldbus module, this can be achieved by using the DLL function "Reset".