Zanussi ZYB 590 XL - Handbuch (Seite 10)

10
When the required temperature is reached, an
acoustic alarm will sound for a short time and the
thermometer symbol will illuminate permanently.
How to set the temperature and cooking
time
Press button “ “ and “ “ to increase or decrease
the pre-set temperature while the “°” symbol is
flashing (Fig. 6). The maximum temperature is
250°C.
Press button “ “ and “ “ to increase or decrease
the pre-set cooking time while the symbol is
flashing.
Safety Thermostat
To prevent dangerous overheating (through
incorrect use of the appliance or defective
components), the oven is fitted with a safety
thermostat, which interrupts the power supply. The
oven switches back on again automatically, when
the temperature drops.
Should the safety thermostat trigger due to incorrect
use of the appliance, it is enough to remedy the error
after the oven has cooled down; if on the other hand,
the thermostat triggers because of a defective
component, please contact Customer Service.
The cooling fan
The cooling fan is designed to cool the the oven
and the control panel. The fan switches on
automatically after a few minutes of cooking. Warm
air is blown out through the aperture near the
oven door handle. When the oven is switched off,
the fan may run on after the oven is switched off to
keep the controls cool. This is quite normal.
The action of the cooling fan will depend
on how long the oven has been used and
at what temperature. It may not switch in at
all at lower temperature settings nor run
on where the oven has only been used
for a short time.
Fig. 6