Zanussi ZYB 590 XL - Handbuch (Seite 31)

31
Clean the oven door glass with warm water and a
soft cloth only. Never use harsh abrasives as they
could damage the special heat-resistant surface of
the inner glasses.
Once the cleaning is carried out, refit the oven door,
following the procedure in reverse.
The three glasses in the middle are special glasses
that have been treated to resist heat. One is marked
with a small dot located on a corner, the other with
a black frame and the third one has no marking.
It is important that, when refitting the oven door, the
inner glasses are fixed in the right position.
To check if this operation has been carried out
correctly, when inserting the glass, make sure that:
the glass marked with the black frame must be
arranged with the decorated surface which looks
towards the inner side of the door. The slight
roughness of the printing must not be discernible
when you stroke your fingers over the visible
surface;
the dot is located on the upper right corner of the
glass (see fig. 6 and fig. 7).
5 55 55
6 66 66 7 77 77
Mod. ZYB 590 XL Mod. ZYB 591 XL