Zanussi ZYB 590 XL - Handbuch (Seite 25)

25
Pyrolytic cleaning
The oven cavity is coated with a special enamel
resistant to high temperatures.
During the pyrolytic cleaning operation, the tempe-
rature inside the oven can reach about 500 °C thus
burning food residuals.
For your security, during the pyrolytic cleaning
operation, the oven door automatically locks when
the temperature inside the oven approaches about
300 °C.
Upon completion of the cleaning operation,
the oven door will be locked until the oven
cavity has cooled down.
The cooling fan operates until the oven has cooled
down. After cooking, it is advisable to remove all
the food residues with a wet sponge.
However, from time to time, it will be necessary to
do a more complete and thorough cleaning, using
the pyrolytic cleaning function. You can select two
different levels of pyrolytic cleaning depending on
how dirty the oven is.
If the oven cavity is not very dirty, we recommend
that you select the pyrolytic 1 function (P I) in the
programmer display.
It is advisable to wipe the oven over with a soft
sponge soaked in warm water after each pyrolytic
cleaning cycle is carried out.
If the oven cavity is very dirty, we advise you to
select the pyrolytic 2 function (P 2) in the programmer
display.
During the pyrolytic cleaning function, it is not
possible to use the oven for 2 hours when selecting
the Pyr 1 function and up to 2 1/2 hours when the
Pyr 2 function is active.
After a significant number of cooking, the
cleaning reminder suggests to activate a
pyrolytic cleaning cycle. The “Pyro”
message will flash in the display and an
acoustic signal will be emitted for about 15
seconds.
Select the type of pyrolytic cycle
depending on how dirty the oven is.
The reminder message will be displayed
each time the oven is switched off until a
complete pyrolytic cleaning cycle is
performed.