Zanussi ZYB 590 XL - Handbuch (Seite 27)

27
Cleaning
Clean the set of shelf supports with telescopic rails on
the outside only with commercially available
detergents.
Rinse well and dry with a soft cloth.
The telescopic rails must not be cleaned
in the dishwasher.
When cleaning the shelf supports, take
care not to remove the lubricating
grease behind the telescopic runners.
This is meant to ensure their good
operation.
Once the cleaning is carried out, refit the shelf sup-
ports following the procedure in reverse.
Please, ensure the retaining nuts are
secure when refitting the shelf support.
To activate the pyrolytic cleaning function proceed
as follows:
1. Press button to switch on the oven. Press
the button as often as necessary, until the
“Pyro“ function symbol (level 1 - P I)
will appear in the display (Fig. 19).
Simultaneously, the symbol
and the
“Pyro” message will flash in the display and
an acoustic signal will be emitted (Fig. 20).
This means that, before activating the pyrolytic
cleaning function, you have to remove the shelf
supports and all the oven accessories.
2. The Cooking Duration symbol will flash
for 5 seconds; during this time push ' ' or ' '
buttons to select the pyrolytic 1 (P I) or pyrolytic
2 (P 2) function (Fig. 21).
3. Once you have chosen the desired pyrolytic
function, the “Pyro”message will flash in the
display waiting for confirmation to start the pyro
cleaning function.
4. To confirm which pyrolytic function you desire,
press button . The “Pyro” message will
stop flashing and the symbol will
Fig. 19
Fig. 20
Fig. 21