Zanussi ZYB 590 XL - Handbuch (Seite 20)

20
To unlock the oven:
Press buttons
and “ “ at the same time and
keep them pressed for about 3 seconds. An acoustic
signal will be emitted and the indication ‘SAFE’ will
go off. The oven can now be operated.
"Fast Heat Up" function
After a cooking function has been selected and the
temperature has been adjusted, the cavity will
gradually heat up until the selected temperature is
reached. This will take from 10 to 15 minutes,
depending on selected function and temperature.
If it is necessary to reach the required temperature
in a shorter time, the "Fast Heat Up" Function can
be used.
1) Switch the oven on by pressing button .
2) Set the required cooking function and
temperature as explained in the previous pages.
3) Set the temperature by pressing button “ “ or
“ “. The temperature will appear on the
display.
4) Press button B . The temperature display will
show "FHU" (Fig. 14).
5) press button and the symbol “°” will flash
for approximately 10 seconds. Now it is possible
to select the required temperature by pressing
button “ “ or “ “.
4) When the required temperature is reached,
an acoustic alarm will sound for a short time,
and the temperature display will revert to the
set temperature.
This function can be used with any cooking function
or temperature.
Fig. 14