Enabling/disabling the hotkey delay – Guntermann & Drunck DL-Vision(M/S) Benutzerhandbuch
Seite 92
Configuration
26 · G&D DL-Vision(M/S)
Enabling/Disabling the hotkey delay
Press the
Hotkey+Backspace
(default:
Ctrl+Backspace
) key combination for seven sec-
onds in order to start the setup mode.
You can disable the hotkey delay if you want to start the setup mode directly after
pressing the key combination.
How to enable/disable the hotkey delay:
ADVICE:
The web application can be used to adjust the delay within a time span
between 1 and 60 seconds.
Setu
p mode
1. Press the key combination
Hotkey+Backspace
(default:
Ctrl
+
Backspace
) to
enable the setup mode.
If the hotkey delay is active, press the key combination during the adjusted time (default:
7 seconds).
2. Press one of the setup keys listed below to enable/disable the hotkey delay:
7
enables hotkey delay (7 seconds)
8
disables hotkey delay
Conf
ig
Panel
1. Click on
KVM Extenders > [All Extenders]
in the tree view.
2. Double-click the computer module of the KVM extender to be configured.
3. Click the
General
tab.
4. Use the
Hotkey delay
box
to enter the desired delay.
The maximum time span for the delay is 60 seconds. The value 0 disables the delay.
5. Click
OK
to save your changes.