Burkert Type 8681 - Handbuch (Seite 12)

12
Hardware and Software Installation
storage location of the service-programm (pC) 3.2.5.
The storage location for the Service Program for PC is selected automatically at the Set-up process.
installing the Hardware 3.3.
Usually the Bluetooth adapter kit is used in conjunction with the smartphone. The PC connection can be estab-
lished using the USB adapter kit or alternatively the Bluetooth adapter kit.
usB adapter Kit 3.3.1.
If the service program is used in conjunction with the usB adapter kit, the USB must simply be plugged in.
The necessary driver file will be also installed during the Set-up pocess, see chapter
3.1.3.
After connecting the USB adapter with the PC the adapter also will be installed automatically.
At the initial installation of the driver appears the message �Windows Logo Test failed� - this message comes directly
from Windows because the driver is not certified by Windows. This message can be ignored, it has no influence on
the functioning of the program.
A virtual serial interface (COM) is provided.
Connect the USB adapter to the adapter cable
→
(USB adapter kit) USB to PC
Connection to the Service
interface
Connect adapter cable to the service interface of the
→
control head (remove hood beforehand)
Switch on power supply for the control head
→
Set the right switch positions at the USB adapter:
→
- set MicroController voltage to „5 V“
- set the switch to „Komm“ for communication with the
ServiceProgram and for the firmware update
(during the update operation, after prompting set the
switch to �Prog� )
USB status LED
Power status LED
MicroController voltage
Firmware Update/
Communication
english
Type 8681