Burkert Type 8681 - Handbuch (Seite 13)

13
Hardware and Software Installation
Bluetooth adapter Kit 3.3.2.
The PC connection can alternatively be established using the Bluetooth adapter kit:
Connect Bluetooth module to the adapter cable
→
(Bluetooth adapter kit)
Connect adapter cable to the service interface of the
→
control head (remove hood beforehand)
Switch on power supply for the control head
→
Switch on Bluetooth module –
→
After a brief initialization, status LED flashes approx.
every 2 s (if the control head was detected)
Status-LED
Switch on Bluetooth
module (BlueSerial)
Control head with connected Bluetooth module is ready to
use:
(Power must be supplied to the control head)
note: If the connection is not established, the inad-
equate charge state of the Bluetooth module may be
the cause of the fault despite the correct display on
the LED.
english
Type 8681