Burkert Type 8681 - Handbuch (Seite 25)

25
Software for Smartphone / PC
Bus submenu 4.4.5.
Type 8681 – Communicator
Rev. 2.4.0.0
Bus
Asi:
address:
IO:
ID:
ext. ID 1:
ext. ID 2:
Profile:
0 ….
7 hex
A hex
7 hex
E
hex
S-7.A.E
Screen: Bus (AS-i)
In the Bus submenu the device first reads out which device variant is con- •
nected (AS-i, DeviceNet or 24V/110V). Then an overview of the specific
parameters is indicated.
as-i variant: •
the parameters (factory setting):
- Address: 0
- IO: 7 hex
- ID: A hex
- Extended ID1: 7 hex
- Extended ID2: E hex
(the marked with
data can be changed)
devicenet variant: •
The parameters (factory setting):
- Address: 63 and
- Baud rate: 125 kbit/s
can be changed with DIP switches only. There are no other parameters.
24 V variant: • no parameters available
110 V variant: • no parameters available
Press to return to SYSTEM mode.
menu COm 4.5.
Type 8681 – Communicator
Rev. 2.6.0.0 (Demo mode)
AUTO MAN SYSTEM COM
Connect
COM1 Port:
Demo mode
via BlueSerial
Screen in mode: COM
Screen page which opens as soon as the Service Program starts to •
select a connection (see chapter 3.2.2. Configuring BlueSerial in the
Smartphone or see chapter 3.2.3. Configuring BlueSerial on the PC) and
connect by
clicking on
Connect.
(but for the firmware update the connection has to be disconnected)
There will be an automatic assignment of the COM port (based on the •
interface name for the USB adapter)
A connection cannot be established, an error message is indicated. •
A • demo mode is available.
In the demo mode the �Feedback control of the control head� are ran-
domly generated, it does not reflect real conditions.
In the demo mode, the menu items of the program can be selected
without connection to the control head.
english
Type 8681