LumaSense Technologies IGA 320/23 - Handbuch (Seite 18)

IMPAC pyrometer IGA 320/23
18
7.12 Trend output (analyzing)
The graph’s curve depicts the tem-
perature change over time within
the specified temperature range.
Additionally, other information appears in
this window; such as recorded time (x-axis)
and temperature in degrees (y-axis) as well
as the time and temperature at the vertical
cursor line which can be dragged with the
mouse.
Selecting the Trend output initially causes
all the saved data to be displayed.
If the data exceeds an amount that can be
represented reasonably, you may “Zoom“ in
on a partial segment using the mouse (such
as the segment represented in the example).
Under “Total” you can return to the represen-
tation of the entire curve.
Note: The last reading is saved in the standard.i12 file and automatically appears in this
form upon opening Listing or Trend output.
If file open was loaded using another file, the previous file will be overwritten and
replaced by the standard.i12 file.
7.13
PC sampling rate (time interval between two measurements)
This function sets a time interval. After each inter-
val one measured value is stored on the PC. The
bigger the time interval the smaller will be the
stored file. This function is mainly used for long
term measurements.
7.14
Spot size calculator
After entering the aperture and the main spot
size, the input of interim values calculates spot
sizes in different measuring distances of the
fixed optics.