JUMO 707020 dTRANS T02 LCD - Four-Wire Transmitter Operating Manual - Handbuch (Seite 70)

32
6 Tips ...
... of a more general nature
H
If none of the parameters can be modified, then you may
have locked the operation on the instrument through the
setup program. Please check the setting using the setup
program.
The parameter can only be modified if the level at which the
parameter can be found is not inhibited.
H
Both outputs (current and voltage) are always available at
the same time. However, the output that has not been acti-
vated only has an accuracy of approx. ± 2% of full scale.
A
The frequency output will not be operated as long as the
setup interface is active.
: