JUMO 707020 dTRANS T02 LCD - Four-Wire Transmitter Operating Manual - Handbuch (Seite 71)

33
7 PC setup program
The PC setup program, which is available as an extra, can be used
to modify all parameters of the transmitter (including the custom lin-
earization) with ease. Through the setup interface, the transmitter
and the PC are linked via the “PC interface”.
Configurable parameters
- TAG number (10 characters)
- analog input (sensor type)
- connection circuit (2-/3-/4-wire circuit)
- external or constant cold junction
- custom linearization
- range limits (start and end)
- output signal current/voltage/frequency rising/falling
- digital filter
- response to probe break/short-circuit
- recalibration/fine calibration
- instrument calibration
- limit value/differential of the limit comparators
- file-info text
Additional benefits of the PC setup program
- manage several settings
- one setting for several transmitters
- print out setting for documentation
- operation can be switched to GMA standard
A
The frequency output will not be operated as long as the
setup interface is activated.