Lupine Piko 1200 Lumens - 13W - Handbuch (Seite 15)

28 29 Piko Piko
Deut
sc
h
Engli
sh
2 2
Mounting
1
2 3
For mounting the Piko on a handlebar, two
optional CNC Quick Release mounts are available.
Have a look at www.lupine.de (Art.No. 225 for
Ø 25.4 mm/Art.No. 231 for Ø 31.8 mm)
Handlebar mounting:
Put the clamp around the
handle bar and close.
For mounting, please first loosen the screws on the
helmet mount/headband.
Only one screw and the
additionally supplied black o-rings are required
for mounting the Piko on the bar.
Change the blue
o-ring to a black one on the screw. Put the screw
through the hole of the handlebar mount, then put
the second black o-ring onto the tip of the screw.
The order of o-ring, screw, o-ring, handlebar mount,
lamp must be strictly adhered to as shown in the
picture in order to ensure flawless functionality.
After that, tighten the screw slightly first, then secu-
rely. Cover the open thread with the included plug.
How to mount the Piko on a
handlebar can also be watched
in a video provided on our
website in the support section!
Your battery is supplied with
a velcro strap, coated with an
anti-slip material to ensure a
secure mount. Use the strap
which most closely matches
your tube size.
Battery mounting:
Battery type:
The regular battery is mounted
with a velcro as shown here and on
page 24. So called Smartcore batteries
also come with a capacity indictaor as
explained on the next page.
13.2Ah 6.6Ah 3.3Ah 3.3Ah
FastClick batteries dont have a loop for a velcro.
However they can be directly put into the clicksys-
tem of the FastClick headbelt or 3M clicksystem.
See page: 25 or 27.
3.3Ah 3.3Ah 2.0Ah 2.0Ah