Lupine Piko 1200 Lumens - 13W - Handbuch (Seite 21)

40 41 Piko Piko
Deut
sc
h
Engli
sh
Troubeshooting
3 3
Battery life varies according to battery age and condition,
as well as ambient temperature.
Default setting
Piko lamp: 55 g
Piko 4 with battery: 180 g
Piko 7 with battery: 300 g
Piko U4 with battery: 180 g
Piko X4 with battery: 210 g
Piko X7 with battery: 330 g
Piko X Duo with (single) battery: 180 g
Weight:
Input voltage: 100 – 240 V~, 50 – 60 Hz
Charging current:
up to 1.2 A
Compatible batteries: Li-Ion 7.2 V
Charger Wiesel:
13 W 1200 lumens
6 W 650 lumens
4 W 450 lumens
2 W 240 lumens
1 W 120 lumens
0.3 W 40 lumens
Light output: Battery life:
4 hours
9 hours
12 hours
24 hours
42 hours
160 hours
2 hours
4 hours
6 hours
12 hours
21 hours
80 hours
2 hours 40 min.
5 hours
7 hours
14 hours
28 hours
95 hours
Piko 7 / X7: Piko X Duo (two batteries) Piko 4 / X4 / U4:
Lens beam angle: Operating temperature:
22 °
Piko 4/X4: 3.3 Ah / 7.2 V Li-Ion
Piko 7/X7: 6.6 Ah / 7.2 V Li-Ion
Piko X Duo: 2 x 2.0 Ah / 7.2 V Li-Ion
-25 °C to +70 °C
Piko 4/X4: 3 hours
Piko 7/X7: 5:30 hours
Piko X Duo: 2 hours (per battery)
Battery capacity/nominal voltage: Charging time:
IP68
Protection class:
Technical data
Problem
The light does not come on
and the power LEDs do not
flash when the battery is
plugged into the lamp.
With the battery plugged in,
the power LEDs do not come
on, but the PCS LEDs flash.
The runtime is too short.
Even after charging only
the 20% LED will light up
at the Smartcore battery.
Cause
 Extremely discharged battery.
 Battery not plugged into the
light or not plugged in
properly.
 Faulty LED unit.
 Discharged battery.
 Old battery.
 Very low ambient
temperature.
 Faulty charger.
 Unsuitable battery.
 The indicator was reseted
Solution
 Charge the battery.
 Check all plug contacts.
 LED unit needs replacement.
 Get in touch with Lupine.
 Charge battery.
 Replace battery.
 Keep battery warm.
 Replace charger.
 Use original Lupine battery.
 Discharge the battery with
your light and fully charge it
afterwards.
 In case the problem still
exists.
www.lupine.de/videos/support
For further information how to
recalibrate a battery.