Lupine Piko 1200 Lumens - 13W - Handbuch (Seite 17)

32 33 Piko Piko
Deut
sc
h
Engli
sh
2 2
Operation light
Each quick push of the button switches from high to middle to low beam.
Switching on:
Switching:
Switching off:
The first press of the button switches on the light with maximum power.
The blue LED is illuminated.
To switch off the lamp, keep the button pressed .
Note: The light outputs the maximum amount of light only if airflow lowers
the temperature of the light sufficiently. If the light is not cooled by airflow,
its power is reduced
incrementally to prevent the LEDs and electronic ele-
ments from overheating.
Lamp on
Very low capacity
Battery partly discharged
Battery empty (lamp flashes)
Note: The burn time remaining after the red LED is illuminated depends on
the total battery capacity, the ambient temperature and the battery's age.
The red LED indicates the state of the battery. If the battery voltage decreases
below a certain value, first the red LED is illuminated (the lamp itself also fla-
shes once) and additionally, shortly before the capacity is entirely exhausted,
it starts flashing.
Battery warning indicator:
Warning! When the battery is completely discharged (the
red LED has been flashing for a few minutes), the red and
blue LED flash in turn, the lamp flashes. Stop immediately!
The light will be switched off after flashing several times.
Reserve power
Reserve power:
When the battery is discharged ( the red and blue LED has been flashing for
some minutes), the lamp flashes several times and is then switched off. After
switching the light on again
(double click!) , reserve power is available. Depen-
ding on the age of the battery, some more minutes of light are provided. To
make reserve power last as long as possible, only light below 2 W is provided.
To indicate that reserve power is activated, the
red and blue LEDs flash in turn.
When reserve power is completely discharged, the light will be switched off
automatically. So slow down!
Explanation of LEDs:
Note: If the lamp has only been used with up to 2W, reserve power is not available.
Warning: Do not switch on the light when the battery is
discharged, as this will invariably damage the battery.
Recharge the battery as soon as possible to avoid a deep
discharged battery.
Blue LED on: lamp on
Red LED on: low battery, save power!
Red LED flashing: battery almost empty,
lights flashing: stop immediately!
The blue and the The battery is empty
red LED flash in turn,
the lamp flashes:
The blue and the The lamp is running
red LED flash in turn: on reserve power