Guntermann & Drunck CATVision-USB 2.0 - Handbuch (Seite 32)

Initiation
9 · G&D CATVision-USB 2.0
Initiation
Use the buttons on the power packs to switch on the computer module and the user
module.
Messages during booting
During the System Startup, various information are displayed at the monitor of the
local console.
If a data connection between the computer module and the user module has been
established, those messages are also displayed at the remote console monitor.
Beside the key combination to call the »AdonIS« on-screen display, the following
information are displayed:
Feature Status Meaning
pc unit found computer is switched on and the PS/2 interface and/or the USB
bus provides voltage
not found no voltage at PS/2 and USB bus
If necessary, switch the computer on and ensure that either the
PS/2 plugs of the computer connection cable or the »USB K/M
CPU« interface of the computer module are connected to the
computer.
searching checking connection of computer at computer module
remote unit found twisted pair cabling between computer module and user module ok
not found non-existent or defective twisted pair cabling between compu-
ter module and user module
searching checking connection between computer module and user mod-
ule
local mouse found local console mouse properly connected to the computer mod-
ule
not found no local mouse connected to the computer module
searching checking connection of local console mouse at computer mod-
ule
local keyboard found local console keyboard properly connected to the computer
module
not found no local keyboard connected to the computer module
searching checking connection of local console keyboard at computer
module