Guntermann & Drunck DL-MUX4 - Handbuch (Seite 59)

Configuration
G&D DL-MUX4 · 15
English
Configuration
The configuration of the KVM switch can optionally be carried out in the setup
menu or via the Config Panel web application:
 Enable the setup mode using the console keyboard. You can change the configura-
tion via special setup keys.
 The Config Panel web application provides a graphical user interface to configure
and monitor the KVM switch via web browser.
Overview of the functions and the default settings
The following table provides an overview of functions that can be configured in the
KVM switch. Detailed description of the functions is given in the following pages.
IMPORTANT: Some functions of the KVM switch can only be carried out in either
the setup mode or the Config Panel web application. The following pages provide
notes referring to this.
Function Default setting Page
Activating or deactivating the hotkey delay 7 seconds 18
Changing the hotkey Ctrl 19
Changing the select key sets 1…4 20
Changing the setup key Backspace 21
Support for Multimedia and special Sun keys PC Standard 22
Support for special keyboards disabled 24
Changing the scancode set of a
PS/2 keyboard
Scancode set 2 24
(De)activating the switching buttons, select keys,
serial and IP
25
Reinitialising USB input devices Off 26
Switching Delay No 26
Adjusting the transfer speed of USB K/M
signals
Full Speed 27
Enabling/disabling the keyboard signal enabled 28
(De)activating channels all channels enabled 29
Activating or resetting a PS/2 mouse 29
Resetting the default settings 30