Powerfix PLPRS A1 - Handbuch (Seite 12)

9 PLPRS A1
GB
CY
Troubleshooting
In this chapter you will receive important informa-
tion for malfunction localisation and malfunction
remedies.
Malfunction causes and remedies
The following table will help with localising and
remedying minor malfunctions:
Defect
Possible
cause
Solution
The wax melter
tip does not
get hot.
The batteries
have been
inserted incor-
rectly.
Insert the bat-
teries as per
the depiction
in the battery
compartment .
The batteries
are discharged. Insert two
new batteries.
NOTICE
► If you cannot solve the problem with the
aforementioned solutions, please contact the
Service Hotline (see chapter
Service) .
Cleaning
CAUTION
Damage to the appliance!
► Ensure that, when cleaning it, no moisture can
penetrate into the appliance, so as to avoid
irreparable damage to it.
► Do not use chemical or abrasive cleaning
agents. These could damage the housing.
♦ Clean the wax melter and the wax melter
tip with the cleaning cloth only when
they have cooled down.
Storage
If you do not intend to use the appliance for an
extended period of time, remove the batteries.
Store all parts of the Laminate/Parquet Repair Kit
in the storage case and at a clean, dry location
out of direct sunlight.
IB_102691_PLPRSA1_LB7.indb 9 10.07.14 10:48