Hach-Lange TENSETTE plus User Manual - Handbuch (Seite 17)

17
Section 4 Operation
4.1 Software Menu
PIPETTE
RPIPET
STEPPER
DILUTE
PROGRAM
PROG NR. Default Volumes
1 0.2 mL
2 0.4 mL
3 0.5 mL
4 1.0 mL
5 1.3 mL
6 2.0 mL
7 2.3 mL
8 2.5 mL
9 5.0 mL
OPTIONS
CALIBRATE
Calibration mode ( Section 5 Calibration on page
27 ).
TWO POINTS Two point calibration
ONE POINT One point calibration
COUNTER Displays number of pipettings since last calibration.
SERVICE
The piston can be disconnected and reconnected in
Service mode. For details see Section 6
Maintenance on page 31 .
NAME
This function enables user to set a name to the
pipette. The name is always shown on the display
when the pipette is in sleep mode. To change the
default name choose NAME from the menu and
select EDIT. The first digit starts to flash. Change
the digit with the scroll key and accept and move to
next digit with OK. When the last digit is accepted
the name is changed.