WIKA CPH6000 - Handbuch (Seite 10)

10 WIKA operating instructions ProcessCalibrator, model CPH6000
11069023.04 11/2012 GB/D
GB
2. Safety
Input volt-
age/current
Date of manufacture
For an explana-
tion of symbols,
see below
Output voltage/cur-
rent
Interface
Instrument version
permissible
ambient tem-
perature
WARNING!
Follow the instructions listed below for charging the Lithium-Ion
batteries. Failure to do so may cause the Lithium-Ion batteries to
become hot, explode or ignite and result in serious injury.
■ To charge the Lithium-Ion batteries, only ever use the specified
WIKA battery charger.
■ Never connect the Lithium-Ion batteries directly to a mains plug or
to a car‘s cigarette lighter.
■ Never leave the Lithium-Ion batteries in or near fire, nor in direct
sunlight. If the Lithium-Ion batteries become hot, the built-in safety
device is activated and overcharging prevented. Heating the
Lithium-Ion batteries can damage the safety device and can thus
lead them to heat up further, to cease to work or to ignite.
WARNING!
Never continue to charge the Lithium-Ion batteries if they do not fully
recharge within the specified time. Doing so may cause the Lithium-Ion
batteries to become hot, explode or ignite.
2.5 Labelling, safety marks
2.5.1 Product label