WIKA CPH6000 - Handbuch (Seite 29)

29 WIKA operating instructions ProcessCalibrator, model CPH6000
11069023.04 11/2012 GB/D
GB
mA
Compensation for height differences
If a significant elevation difference exists between the CPT6000 reference pressure
sensor and the test item, then the pressure difference, based on the head pressure,
can be compensated automatically via the menu (see chapter 7.4.5 "SETUP additional
menu options: CPH-Configuration").
After switching on the CPH6000, a brief device status message
appears showing the current settings.
6.2 Test and calibration assemblies (with test pumps)
6. Installation and mounting
Test item (electrical)
Test item (mechanical)