WIKA CPH6000 - Handbuch (Seite 37)

37 WIKA operating instructions ProcessCalibrator, model CPH6000
11069023.04 11/2012 GB/D
GB
b
c
d
e
f
a
Operating mode: SWITCH-TEST
In the SWITCH-TEST mode, along with the reference pressure sensor data (see
MEASURING mode), the status and switching points of the pressure switch are also
displayed.
7. Commissioning, operation
a) Current measured value of the CPT6000 reference pressure sensor
b) Current switch position/status of the pressure switch
c) Opening switching point
d) Closing switching point
e) Hysteresis/separation between opening and closing of the switch
f) Pressure unit (settable via menu)