Burkert Type 8025 - Handbuch (Seite 56)

54
Operatingandcommissioning
→
If you do not want to adjust another parameter, confirm the "END" parameter to save the settings or not and
go back to the Process level.
8.7 Details of the Test menu
To access the Test menu, simultaneously press keys
0......9
ENTER
for at least 5 s.
This menu comprises the following configurable parameters:
CAL AO1
Process level
FREQUENC.
FLOw
wARNiNG
12.6 L/MiN END
0......9
Adjusting the 4-20 mA output. See chap. “8.7.1”.
SAVE N/Y
Reading the rotational frequency of the paddle wheel. See chap. “8.7.2”.
Simulating a flow rate to check the correct operating of the outputs. See chap. “8.7.3”.
Saving the changes made within the Test menu or
not. If the changes are saved, the device operates
with the new settings.
FLOw-w.
Setting the flow rate threshold values for which a warning message
is generated.See chap. “8.7.4”.
VOLUME-w.
Setting a threshold value of the daily totalizer, for which a warning
message is generated. See chap. “8.7.5”.
REtURN
0......9
Figure 49: Diagram of the Test menu
English
Type 8025 UNIVERSAL