WIKA CPH6400 - Handbuch (Seite 31)

31 WIKA operating instructions, model CPH6400
11313439.04 12/2012 GB/D
GB
6. Commissioning, operation
6.8.4 Data logger (LOGGER)
Via the FUNC key various configurations can be achieved, e.g. the integrated data logger
can be operated.
Activating the Data Logger menu item (LOGGER)
Pressing the FUNC key four times* (directly within the measuring mode).
* If you already are in a FUNC menu item, press the FUNC key until the "LOGGER" menu item appears.
In the "LOGGER" FUNC menu item, the data recording can be started via the MODE key,
paused via the TARE key and stopped via the UNIT key.
1. Currently stored points and max. possible number of stored points at pressure
position P
2. Currently stored points and max. possible number of stored points at temperature
position T
3. Cycle time (changeable via the WIKA "PrintCal" PC software)
FUNC
Return to the standard measuring mode by pressing the FUNC key several
times.
The WIKA "PrintCal" PC software is used to upload and display the
saved logger data and also to configure the logger. Moreover "PrintCal"
is also used to set the cycle time (see point 3) from 1 ... 3600 seconds.
1
3
2