Lenze Cam Designer Professional getting started - Handbuch (Seite 65)

Cam Designer Professional
L
63 Cam Designer Professional DE/EN 2.0
Connections
In Curve Mode, the individual sections of
the cam profile are automatically joined
(connected) to form a continuous curve. In
this tab, you can select the type of
connection.
• The default setting is Automatic .
Depending on the shape and the
boundary values of the profile section,
the program will automatically select
connections with a minimum jolt to
protect the machine.
• Alternatively, you can select fifth degree
polynomials.
• If you select Reduced Overshoot,
polynomials can be optionally combined
with lines to reduce overshoot to a
minimum.
Machine
By default, the selection of graphical
objects and the representation of speed and
acceleration refers to geometrical units. In
this tab, you can enter machine data to
calculate the physical limit values of the
motion profile.
• You can choose between linear and
rotary axis and define the reference
speed of the master axis for the
selected axis.
• For rotary axes, the maximum speed is
selected in revolutions per minute
[r.p.m.], for linear axes, in units of
distance per second [1/s].
• If you uncheck Normalized Velocity and Acceleration in Chart, the velocity will be indicated in units of
distance per second [1/s] and the acceleration in units of distance per second 2 [1/s 2 ].
• The slave is always considered to have a linear axis. The value range of the slave is therefore always
indicated in units of distance (e. g. mm). The velocity is indicated in units of distance/s (mm/s) and the
acceleration in units of distance/s 2 (mm/s 2 ).
Show/Hide Bookmarks