Lenze Cam Designer Professional getting started - Handbuch (Seite 76)

Cam Designer Professional
L
74 Cam Designer Professional DE/EN 2.0
7.6 Creation of cam profiles
Create a simple cam profile and transfer it to the drive controller.
For a better representation and obtaining a zero axis, go to the Settings dialog for the slave axis and
select a negative value in the
Minimum field (e. g. -20,000) and a positive value in the Maximum field
(20,000).
• Create a cam profile using all tools available. In this example, you can only use the polynomial
with the highest exponent. Please ensure that the profile objects do not overlap each other and
that the cam profile is closed from 0 to 360°.
• Go to Interpolation Mode.
• Compile your cam profile.
The worksheet and the time derivations might be as follows:
 ‚ ƒ „
 Table Creates a line with a point. If you select the object, you can use the menu
commands
Edit ➞ ➞ ➞ ➞ Object Properties... to edit the object.
‚ Line In this section you can find a straight line.
ƒ 5th degree polynomial (x 5 ) In this section you can find a mathematical
f(x)=ax 5 +bx 4 +cx 3 +dx 2 +ex+f
„ Offset sine curve This section shows an offset sine curve
Show/Hide Bookmarks