Lenze Cam Designer Professional getting started - Handbuch (Seite 74)

Cam Designer Professional
L
72 Cam Designer Professional DE/EN 2.0
7.2 Entry of technological requirements
See chapter 5.2, “Object Input Mode”. ( ¶64)
1. If Cam Designer is not in Object Input Mode (level 1), select View ➞ ➞ ➞ ➞ Object Input Mode to
change to this mode.
2. Create the graphical elements required under menu Draw.
Tip!
Please observe the following when specifying the boundary conditions:
• Do not specify more conditions than necessary.
• The length of stop positions should be limited to its minimum.
• The higher the degree of freedom for Cam Designer in automatic generation, the smoother the
resulting profiles. If necessary, line segments will be added to the polynomials.
• We recommend to start the automatic generation of connections with the minimum number of
conditions and add more conditions later, if necessary.
7.3 Join segments
See chapter 5.3, “Curve Mode”. ( ¶65)
1. Select View ➞ ➞ ➞ ➞ Curve Mode to change to Curve Mode.
2. Select Edit ➞ ➞ ➞ ➞ Start Calculation... to automatically connect the graphical elements created in
Object Input Mode.
Tip!
• Go to the Settings dialog box, select Edit ➞ ➞ ➞ ➞ Project Settings... and click the Connections tab
to select the connection type.
• The value range for velocity and acceleration can be shown as normalised or physical values.
(
Edit ➞ ➞ ➞ ➞ Project Settings..., Machine tab)
Show/Hide Bookmarks