Lenze Cam Designer Professional getting started - Handbuch (Seite 75)

Cam Designer Professional
L
73 Cam Designer Professional DE/EN 2.0
7.4 Adaptation of the acceleration (points)
See chapter 5.3, “Curve Mode”, section “Turning points”. ( ¶65)
1. Select Edit ➞ ➞ ➞ ➞ Point Acceleration if you want to correct the acceleration manually. The
following mouse pointer symbol appears .
2. Click the point object the acceleration of which you want to change.
3. Go to the Acceleration dialog box and use the arrow keys
to select the desired acceleration.
4. Click to close the Acceleration dialog.
Tip!
If you have manually selected the acceleration of a point object in the Acceleration dialog box, go to
Object Input Mode and uncheck
Selfadjusting Acceleration ( Edit ➞ ➞ ➞ ➞ Object Properties). This ensures
that the selected value will not be overwritten by mistake.
7.5 Generation of table interpolation
See chapter 5.4, “Interpolation Mode”. ( ¶68)
1. Select View ➞ ➞ ➞ ➞ Interpolation Mode to change to Interpolation Mode.
2. Select Edit ➞ ➞ ➞ ➞ Start Calculation... to open the Optimized Linear Interpolation dialog.
3. Go to the Number of Points field and select the number of value pairs between 10 and 1024.
Tip!
Proceed as follows to optimise the distribution of points:
When starting a new project, Absolute Data Model must be chosen as feature for the slave axis.
• Go to the Optimization Steps field and select the required number of optimisation steps
between 1000 and 10000.
• Click Optimize to automatically calculate the optimal distribution of points with the help of a
neuron network (artificial intelligence).
4. Select OK to generate the value pairs and close the dialog box.
Show/Hide Bookmarks