Lenze Cam Designer Professional getting started - Handbuch (Seite 81)

Cam Designer Professional
L
79 Cam Designer Professional DE/EN 2.0
8 Import of profile data into GDC
Stop!
Select the basic cam settings first
( Parameter menu ➞ ➞ ➞ ➞ Short Commissioning).
You can find information about this in the operating instructions for the drive controller in chapter
“Commissioning”.
1. Select Basic Data in the Parameter Menu to open the Basic Cam Data dialog.
In the Basic Cam Data dialog box:
2. Use the
Max. No. of Curves field to enter the number of profiles.
3. Use the Data Structure list field to select the data model (relative/absolute).
4. Click Curve Editor to open the Curve Editor dialog.
In the Curve Editor dialog:
5. Select from the group box
Edit Cam...
– the Import option if you want to import the whole cam profile.
– the Mathematical option if you want to import one or more profile segments.
Tip!
The Mathematical option in the Edit Cam... group box allows you to divide the cam profile into five
sections. For each of these sections you can select the type (polynomial, sinusoidal, resting phase,
synchronous phase, import data) and define the start and end point.
If you want to import a profile section select
Import Data.
6. For the entire cam ( Import option) or the selected profile section (Mathematical option) click
Search to select the file containing the value pairs which you have previously saved with
File ➞ ➞ ➞ ➞ GDC Export... in Cam Designer.
7. Click Check Profile to check the profile data for plausibility.
8. Click
– Transfer Data to transfer the profile data to the drive controller.
– Save Cam Data to save the cam data in a file for further processing with a PLC or industrial
PC.
Show/Hide Bookmarks