Showing information about sfp modules, Resetting the default settings – Guntermann & Drunck Audio-Transceiver-Fiber Benutzerhandbuch
Seite 31
Configuration
Audio-Transceiver-Fiber · 10
English
Showing information about SFP modules
The menu
Show Fiber Line Info
shows you information about SFP (Small Form-factor
Pluggable) modules. SFP modules are used to establish a connection to the second
expansion module.
How to show SFP information in the terminal emulation program:
1. Use the terminal emulation program to establish a connection.
2. Use the
arrow keys
to select the row
Show Fiber Line Info
.
3. Press
Enter
to show information about the SFP module in the terminal emulation
program.
The following module features are listed:
4. Press
Q
to return to the main menu.
Resetting the default settings
This function resets the default settings of the KVM extender. Directly after this
function has been carried out the default settings (as shown in the screenshot on
page 8) are activated.
How to reset the default settings:
1. Use the terminal emulation program to establish a connection to the KVM system.
2. Use the
arrow keys
to select the row
Set System Defaults
.
3. Press
Enter
to reset the default settings.
4. Confirm the appearing security request by pressing
Enter
.
Press
Q
to cancel the task.
SFP Status:
Status
SFT Vendor:
Vendor
SFP ID:
Type designation
Temperature:
Temperature (°C)
Voltage:
Voltage (V)
BiasCurrent:
Quiescent current (mA)
Tx Power:
Transmission power (dBm/mW)
Rx AV-Power:
Received power(dBm/mW)