Powerfix Z16531 - Handbuch (Seite 5)

7 GB/IE
Operation / Cleaning and care / Disposal
2. Adjust the impact force to suit the materials,
staples or nails.
3. Press the operating lever 1 down firmly.
Examples of use:
The stapler gun is suitable for the following purposes:
-
Attaching coverings to the seating surface of
chairs.
- Attaching a skirting at the joint between wall
and floor coverings.
- Stretching and stapling canvasses to frames.
- Attaching protective films to insulation materials
when installing thermal insulation.
- Attaching decorative materials.
 Removing staples
 To avoid the risk of injury!

Ensure that the operating handle 1 will not be
pressed

Push the hook 3 under the staple or nail head
(see Fig. F).

Pull the rear part of the stapler gun upwards to
draw out the staple or nail from the workpiece.
 Removing jammed staples
from the stapler gun
Staples or nails may become jammed in the stapler
gun during operation. Remove jammed staples as
follows:
1. Press in the staple pusher
2 slightly and then
pull it downwards. Then pull the staple pusher 2
completely out of the magazine 4 .
2. Turn the stapler gun over so that the magazine
4 is pointing upwards.
3. Press the magazine 4 at the side wings 5
backwards and pull the magazine 4 upwards
(see Fig. E).
4. Now remove the jammed staples from the
magazine 4 .
5. Press the magazine 4 at the side wings 5
backwards and press it downwards until it en-
gages to fix the magazine
4 back in place.
Note: Do not use the stapler gun if it shows more
serious defects (damage to body etc.). If necessary
have your stapler repaired by a qualified specialist.
Take note that the manufacturer’s original spare
parts only should be used in any repair.
 Tips
1. In order to have a good quality of stapling, it is
suggested to fill only one of staple / nail type in
the staple gun in each time.
2. When you want to change other types of sta-
ples, please make sure all remaining staples /
nails are used up or not in staple gun before
insert other types of staples/nails.
 Cleaning and care

The product must be kept clean, dry and free
of oil or lubricants at all times.

Clean the product with a slightly dampened,
non-fluffing cloth.

Never use corrosive or abrasive cleaning
agents. These may damage the surface of the
product.
 Disposal
The packaging is made entirely of recy-
clable materials, which you may dispose
of at local recycling facilities.
Contact your local refuse disposal authority for more
details of how to dispose of your worn-out product.
Product description:
+DQGKHOGVWDSOHUVHW
Model No.: Z16531
Version:

B+DQGWDFNHUB&RQWHQWB/%LQGG