3 operation – Henkel LOCTITE 97504 Benutzerhandbuch
Seite 58
58
3 Operation
3.2
Displays and Operating Elements
Display, Electronic Controller
The dispensing station is equipped with an electronic controller. For descriptions of
settings please refer to:
– Sections 3.7.1 ff
– the flow chart in Section 4.
The display of the electronic controller reads as follows when the system is in ready
state:
or
Display Short description Page
Cont. operating mode (optional, if selected: Timed mode nn.n sec.) 69
A
:
B Ratio
by
volume,
product
A
vs.
B 66
Max. Maximum
speed
of
rotation
(output),
pump
motor 69
OK
Jump
to
next
menu
* Jump to service menu (push 2x)
ALT Jump to dispense time setup
(Go to the above-mentioned pages for a detailed description of display items)
1
Speed controller (pump output) 0 – 100 %
2
ESC, Leave the current operation or setup menu
3
Cursor, Input adjustments and navigation
4
OK, Acknowledge, Jump to next menu
5
*
Key, Access to service menu
6
Display
7
ALT, if ALT appears, Jump directly to dispense time setup
7
DualRotorPumpDispenser
OK
Cont.
A:B
2.00:1
Max.
70%
OK
Time
9.2 sec.
A:B
2.00:1
Max.
70%
OK