LumaSense Technologies IN 5-H plus - Handbuch (Seite 21)

IMPAC pyrometers series IN 5 plus
21
10.3 Program start
After installation and the first program start a language must be chosen (German, English, Italian, Spanish.
The language also can be changed in the program). On the start page the screen shows the following icons:
10.4 The start menu
Opens a saved file
Storage of measured values for further processing
Online measurement with color bar display
Online measurement with graphic display
Setting of the parameters of the instrument
Setting of interface, baud rate and pyrometer addresses (RS485)
Time interval between two measurements
Number of connected instruments (max. 2)
Listing of measured or stored values in tabular form
Processing of measured (stored) readings in graph form
Processing of measured (stored) readings in a text file
Calculation of spot sizes in various measuring distances
Only if available: controls the programmable controller PI 6000
10.5 Beginning
Before using the software, the serial interface connected to the pyrometer has to be selected under
the Computer icon. For two devices using the RS232 interface, two PC interfaces must be used.
Two devices using RS485 may be operated simultaneously by the same interface, if two different
addresses have been properly entered (see 9.2.4 Address).
10.6 Number of devices
With a click on “number of devices” InfraWin changes to the display of 1 or 2 devices. If 2 devices
are selected, always 2 windows are displayed for settings or evaluation.
10.7 Basic settings
Under pyrometer parameters all preset values can be
displayed and modified if necessary.
The window Pyrometer parameters contains all parameter
settings described in section 9, Parameters.
Choose the correct setting for your application, the actual set-
ting is displayed.
Notes:
• “Basic range” displays the total range of the pyrometer
automatically and cannot be changed. If the sub range is
changed, the new values must be verified with “OK”
• Under “Material“ you have the possibility to store the
names of different measuring objects with their emissivity
values and to recall them from the list.
• Choose whether the temperature should be displayed in °C
(Celsius) or °F (Fahrenheit).