4 test run – Festo Рабочие компоненты для VTIA, ISO 15407-2 Benutzerhandbuch
Seite 57
Advertising
VABF-S4-1-V2B1…
Festo – VABF-S4-1-V2B1…-D2 – 1212a English
57
Note
The lower switching point of the air-saving function “switch on suction” (Out A) must be
at least 50 mbar above the switching point of the vacuum query (Out B). Reduce the
hysteresis of Out A here if necessary.
Note
Additional setting options can be found in the supplied “pressure sensor SDE 3”
operating instructions.
6.4
Test run
•
Use the test run to check whether the switching outputs of the vacuum module are switching as
required.
Advertising
Dieses Handbuch ist für die folgenden Produkte bezogen werden: