Important details for your information, A quick overview for you, Operating instructions/betriebsanleitung, wud-2x – WIKA WUD-26 Benutzerhandbuch
Seite 3

11611057.01 GB/D 11/2013
3
Operating instructions/Betriebsanleitung, WUD-2x
1. Important details for your information / 2. A quick overview for you
GB
Read these operating instructions without fail before installing and starting the pressure transducer WUD-2x.
1. Important details for your information
Read these operating instructions before installing and starting the pressure transducer. Keep the operating instructions in
a place that is accessible to all users at any time.
The following installation and operating instructions have been compiled by us with great care but it is not feasible to take
all possible applications into consideration. These installation and operation instructions should meet the needs of most
pressure measurement applications. If questions remain regarding a specific application, you can obtain further information:
■
Via our Internet address www.wika.de / www.wika.com
■
The product data sheet is designated as PE 87.08
■
Contact WIKA for additional technical support (+49) 9372 / 132-8976
If the serial number on the product label becomes illegible (e.g. by mechanical damage or repainting), the traceability of the
instrument is not possible any more.
WIKA's pressure transducers WUD-2x are carefully designed and manufactured using state-of-the-art technology. Every
component undergoes strict quality and environmental inspection before assembly and each instrument is fully tested
prior to shipment. Our environmental management system is certified to DIN EN ISO 14001. The finished device has been
tested, cleaned and carefully packed under protective atmosphere prior to dispatchement.
Knowledge required: Install and start the pressure transducer only if you are familiar with the relevant regulations and
directives of your country and if you have the qualification required. Depending on the operating conditions of your applica-
tion you have to have the corresponding knowledge, e.g. of aggressive media.
2. A quick overview for you
If you want to get a quick overview, read Chapters 3, 5, 7 and 11. There you will get some short safety instructions and
important information on your product and its starting. Read these chapters in any case.