Safety – WIKA TR12-M Benutzerhandbuch

Seite 6

Advertising
background image

GB

2. Safety

11419904.02 09/2013 GB/D

WIKA operating instructions models TR12, TC12 (Ex d)

6

The technical specifications contained in these operating instructions must be observed.

Improper handling or operation of the instrument outside of its technical specifications

requires the instrument to be taken out of service immediately and inspected by an

authorised WIKA service engineer.

If the instrument is transported from a cold into a warm environment, the formation of

condensation may result in instrument malfunction. Before putting it back into operation,

wait for the instrument temperature and the room temperature to equalise.

The manufacturer shall not be liable for claims of any type based on operation contrary to

the intended use.

2.2 Personnel qualification

WARNING!

Risk of injury should qualification be insufficient!

Improper handling can result in considerable injury and damage to equipment.

The activities described in these operating instructions may only be carried

out by skilled personnel who have the qualifications described below.

Keep unqualified personnel away from hazardous areas.

Skilled personnel

Skilled personnel are understood to be personnel who, based on their technical training,

knowledge of measurement and control technology and on their experience and knowledge

of country-specific regulations, current standards and directives, are capable of carrying out

the work described and independently recognising potential hazards.

Special operating conditions require further appropriate knowledge, e.g. of aggressive

media.

2.3 Special hazards

WARNING!

Observe the information given in the applicable type examination certificate and

the relevant country-specific regulations for installation and use in hazardous

areas (e.g. IEC 60079-14, NEC, CEC). Non-observance can result in serious

injury and/or damage to the equipment.

For further important safety instructions for instruments with ATEX approval, see

chapter 7 “Information on mounting and operation in hazardous areas”.

Advertising
Dieses Handbuch ist für die folgenden Produkte bezogen werden: