WIKA CPH65I0 - Handbuch (Seite 27)

27 WIKA operating instructions, model CPH65I0
14061681.02 03/2013 GB/D
GB
6. Commissioning, operation
Use the F2 and F3 keys to select the time after which the calibrator will turn itself off, or
disable the auto shut-off by scrolling down to "0".
Use the "AUTO OFF DONE" option to set the parameters and return home. The auto
shut-off time is reset whenever a key is pressed.
6.4.5 Activating and deactivating a display
Use the "DISPLAY" option on the 'Display selection' main menu to access the display
activation menu.
The F2 key can be used to select the desired display. The "ON/OFF" option switches
the selected display on or off. The selected display and the current status "ON/OFF" are
shown in the lower display.
Select the "DONE" option to save the changes and return home. When a display
is deactivated its configuration is retained. As soon as the display is activated, the
configuration is checked against the configurations of the other currently-active displays.
If there is any conflict between configurations, the recalled display’s configuration is
modified to avoid the conflict. If all three displays are deactivated the lower display will
switch on automatically.