WIKA CPH65I0 - Handbuch (Seite 6)

6 WIKA operating instructions, model CPH65I0
14061681.02 03/2013 GB/D
GB
2. Safety
2.1 Intended use
The model CPH65I0 intrinsically-safe hand-held calibrator can be used as a calibration
reference or in any application requiring high-accuracy pressure measurement.
The instrument has been designed and built solely for the intended use described here,
and may only be used accordingly.
The technical specifications contained in these operating instructions must be observed.
Improper handling or operation of the instrument outside of its technical specifications
requires the instrument to be taken out of service immediately and inspected by an
authorised WIKA service engineer.
Handle electronic precision measuring instruments with the required care (protect from
humidity, impacts, strong magnetic fields, static electricity and extreme temperatures,
do not insert any objects into the instrument or its openings). Plugs and sockets must be
protected from contamination.
If the instrument is transported from a cold into a warm environment, the formation of
condensation may result in instrument malfunction. Before putting it back into operation,
wait for the instrument temperature and the room temperature to equalise.
The manufacturer shall not be liable for claims of any type based on operation contrary
to the intended use.
2.2 Personnel qualification
WARNING!
Risk of injury should qualification be insufficient!
Improper handling can result in considerable injury and damage to
equipment.
■ The activities described in these operating instructions may only
be carried out by skilled personnel who have the qualifications
described below.
■ Keep unqualified personnel away from hazardous areas.