WIKA CPP1200-X - Handbuch (Seite 21)

21 WIKA operating instructions model CPP1200-X
GB
14076968.01 12/2013 GB/D
5. Transport, packaging and storage
5. Transport, packaging and storage
5.1 Transport
Check the model CPP1200-X comparison test pump for any damage that may have
been caused by transport.
Obvious damage must be reported immediately.
5.2 Packaging
Do not remove packaging until just before mounting.
Keep the packaging as it will provide optimum protection during transport (e.g. change
in installation site, sending for repair or recalibration).
5.3 Storage
Permissible conditions at the place of storage:
■ Storage temperature: -10 ... +50 °C
■ Humidity: 35 ... 85 % relative humidity
Avoid exposure to the following factors:
■ Direct sunlight or proximity to hot objects
■ Mechanical vibration, mechanical shock (putting it down hard)
■ Soot, vapour, dust and corrosive gases
■ Potentially explosive environments, flammable atmospheres
■ Corrosive liquids
Store the model CPP1200-X comparison test pump in its original packaging in a location
that fulfils the conditions listed above. If the original packaging is not available, pack and
store the instrument as described below:
1. Wrap the instrument in an antistatic plastic film.
2. Place the instrument, along with shock-absorbent material, in the packaging.
3. If stored for a prolonged period of time (more than 30 days), place a bag, containing
a desiccant, inside the packaging.