WIKA CPP1200-X - Handbuch (Seite 34)

34 WIKA operating instructions model CPP1200-X
GB
14076968.01 12/2013 GB/D
8. Faults / 9. Return and disposal
CAUTION!
If faults cannot be eliminated by means of the measures listed above,
shut down the test pump immediately, and ensure that pressure is no
longer present, and secure the instrument from being put back into
operation inadvertently.
In this case, contact the manufacturer.
If a return is needed, please follow the instructions given in chapter
9.1 "Return".
9. Return and disposal
WARNING!
Residual media on the test pump can result in a risk to persons, the
environment and equipment. Take sufficient precautionary measures.
9.1 Return
WARNING!
Strictly observe the following when shipping the instrument:
All instruments delivered to DH-Budenberg/WIKA must be free from any
kind of hazardous substances (acids, bases, solutions etc.).
When returning the instrument, use the original packaging or a suitable transport
package.
To avoid damage:
1. Drain all fluid from reservoir.
2. Wrap the instrument in an antistatic plastic film.
3. Place the instrument, along with the shock-absorbent material, in the packaging.
Place shock-absorbent material evenly on all sides of the transport packaging.
4. If possible, place a bag, containing a desiccant, inside the packaging.
5. Label the shipment as transport of a highly sensitive measuring instrument.
Information on returns can be found under the heading "Service" on our
local website.