EUCHNER HBAS 094594 - Handbuch (Seite 65)

EUCHNER Hand-Held Pendant Station HBAS-094594
095640-02-02/06 Subject to technical modifications Page 25 / 40
It is imperative that the following sequence for the individual parameters is observed!
1. PIN
2. Priority
3. Key click
4. Pulse generator activation
5. Pulse generator delay (when pulse generator active)
6. Pulse generator CW key (when pulse generator active)
7. Pulse generator CCW key (when pulse generator active)
8. Pulse generator frequency (when pulse generator active)
If the pulse generator function is not activated, then the pulse generator parameters
"Pulse generator delay",
"Pulse generator CW key",
"Pulse generator CCW key"
"Pulse generator frequency"
do not need to be transferred.
Parameter
no.
Explanation Parameter value
1 PIN: 1000s digit Only figures 0-9 in HEX format 30H ... 39H
2 PIN: 100s digit Only figures 0-9 in HEX format 30H ... 39H
3 PIN: 10s digit Only figures 0-9 in HEX format 30H ... 39H
4 PIN: 1s digit Only figures 0-9 in HEX format 30H ... 39H
5 Priority:
30H = Control system has priority
31H = HBAS has priority
6 Key click
30H = Key click off
31H = Key click on
7 Pulse generator activation
30H = Pulse generator inactive
31H= Pulse generator active
8 Pulse generator delay 1000s Only figures 0-9 in HEX format 30H ... 39H
9 Pulse generator delay 100s Only figures 0-9 in HEX format 30H ... 39H
10 Pulse generator delay 10s Only figures 0-9 in HEX format 30H ... 39H
11 Pulse generator delay 1s Only figures 0-9 in HEX format 30H ... 39H
12 Pulse generator CW key
All keys except S2 (32H), S7 (37H),
S16 (40H), and S20 (44H)
13 Pulse generator CCW key
All keys except S2 (32H), S7 (37H),
S16 (40H), and S20 (44H)
14 Pulse generator freq. in Hz 100s Only figures 0-9 in HEX format 30H ... 39H
15 Pulse generator freq. in Hz 10s Only figures 0-9 in HEX format 30H ... 39H
16 Pulse generator freq. in Hz 1s Only figures 0-9 in HEX format 30H ... 39H
Error byte:
31H: Parameters transferred correctly
34H: Parameter transfer erroneous