Festo Генератор вакуума OVEM, дюймовый - Handbuch (Seite 73)

OVEM
Festo ć OVEM ć 1004b English 73
4.1.2 Fastening with accessories
With hat rail fastening
1
Fig. 8: Hat rail mounting
1. Fasten the vacuum generator at the bottom with four M3 screws, tightening torque max. 0.8 Nm.
2. Hang the vacuum generator on the hat rail and press in the direction of the arrow.
3. Fasten the vavuum generator to the hat rail with the screw 1.
With the fastening bracket
Fig. 9: Fastening bracket
· Mount the vacuum generator with two screws at the intended location (size of the mounting screws
è Tab. 5: ), tightening torque max. 2.5 Nm.
We recommend that suitable washers be used.
The vacuum generator can also be fitted onto a pneumatic strip with maximum 8 locations.
Information on fitting è Assembly instructions OABM−P−
Ū.
OVEM−
Ū
Type of fastening
Q−/−G− with screws or accessories, è Accessories
−P− via pneumatic strip, è Accessories
Tab. 6: Key features ć mounting types