Festo Генератор вакуума OVEM, дюймовый - Handbuch (Seite 89)

OVEM
Festo ć OVEM ć 1004b English 89
6. Set the switching point (SP or SP
min
) with the UP/DOWN button.
7. Press the EDIT button in order to confirm the value set.
With the switching function window comparator:
è [SP] [
max
] flashes.
8. Set the switching point (SP
max
) with the UP/DOWN button.
9. Press the EDIT button in order to confirm the value set.
è [HY] flashes.
10. Set the value for the hysteresis (HY) with the UP/DOWN button.
11. Press the EDIT button in order to confirm the value set.
è [NO] or [NC] flashes.
12. Set switching characteristic [NO/NC] with the UP/DOWN button.
13. Press the EDIT button in order to confirm the selection.
è The vacuum generator is in the RUN mode.
6.3.3 Set the duration for the reject pulse, electric manual override FORC
L L
L L
Fig. 15: Set reject pulse length (menu structure EDIT mode è Fig. 24: )
The vacuum generator is in the EDIT mode and [Out A] flashes.
Set the duration of the reject pulse
1. Press the B−button until the segment below right and B flash.
2. Press the EDIT button in order to confirm the selection.