WIKA TR30 - Handbuch (Seite 13)

14016442.01 06/2011 GB/D
WIKA operating instructions model TR30 per ATEX 13
GB
■ Process connection with tapered threads
4. Design and function / 5. Transport, packaging and storage
4.3 Scope of delivery
Cross-check scope of delivery with the delivery note.
5. Transport, packaging and storage
5.1 Transport
Check the instrument for any damage that may have been caused during transportation.
Obvious damage must be reported immediately.
5.2 Packaging
Do not remove packaging until just before mounting.
Keep the packaging as it will provide optimum protection during transport (e.g. change in
installation site, sending for repair).
5.3 Storage
Permissible conditions at the place of storage:
■ Storage temperature: 0 ... 70 °C
■ Humidity: 35 ... 85 % relative humidity (no condensation)
Avoid exposure to the following factors:
■ Direct sunlight or proximity to hot objects
■ Mechanical vibration, mechanical shock (putting it down hard)
■ Soot, vapour, dust and corrosive gases
Version with
neck tube
Version with
compression fitting
Circular connector
4-pin M12 x 1
Angular connector
DIN EN 175301-803
Version with
tapered tip
Legend:
A A length (insertion length)
N Neck tube length
(70 mm)
Ød Thermowell diameter
11318708.01