Hand-held thermometer cth 6200, Scal, Conf unit – WIKA CTH6200 Benutzerhandbuch
Seite 11: Offs, P.off, Al.lo, Al.hi, Logg func, Cycl, Cloc
WIKA Betriebsanleitung Hand-Held Thermometer
2146872 09/2004 GB/D
11
GB
WIKA Operating Instructions Hand-Held Thermometer
Hand-Held Thermometer
CTH 6200
Menu
Param.
Values
Meaning
„Menu“
or
SEt
Set Configuration: Generic Settings
ConF
Unit
°C:
All temperatures values are in degrees Celsius
*
°F:
All temperatures values are in degrees Fahrenheit
rES
0.1 °:
Resolution 0.1 °C
*
0.01°
Resolution 0.01 °C
*
Auto:
Resolution is selected automatically
Lin
E.751
Measuring / sensor curve according to EN 60751
*
USEr
In preparation
OFFS
-2.50 °C ... 2.50 °C
The zero point of the measurement will be displaced by this value to
*
resp. -4.50 °F ... 4.50 °F
compensate for deviations in the probe or in the measuring device.
oFF:
Zero displacement inactive (=0.0 °C)
SCAL
-2.000 ... 2.000
The scale of the measuring will be changed by this factor [in %] to
*
compensate deviations of temperature probe or measuring device.
oFF:
Scale correction factor inactive ( = 0.000)
P.oFF
1 ... 120
Auto Power-Off delay in minutes.
Device will be automatically switched off as soon as this time has
elapsed if no key is pressed / no interface communication takes place.
oFF
Auto Power-off function inactive (continuous operation)
Out
oFF:
Function of the output: No output function, lowest power consumption
SEr:
Output is serial interface
dAC:
In preparation
Adr.
01, 11 .. 91
In preparation
SEt
Set Alarm: Settings of alarm function
AL.
AL.
on
Alarm Sensor 1 on, with horn-sound
no. So
Alarm Sensor 1 on, without horn-sound
oFF
No alarm function
AL.Lo
min range ... AL.Hi
Min alarm rail (not when AL.oFF)
AL.Hi
AL.Lo ... max range
Max alarm rail (not when AL.oFF)
SEt
Set Logger: Configuration of logger function
*
LoGG
Func
CYCL
Cyclic: logger function ,cyclic logger`
*
Stor
Store: logger function ,individual value logger`
*
oFF
No logger function
*
CYCL
0:01 ... 60:00
Cycle time of cyclic logger [minutes:seconds]
*
SEt
Set Clock: Setting of real time clock
CLOC
CLOC
HH:MM
Clock: setting ot time hours:minutes
dAtE
TT.MM
Date: setting of time day.month
YEAr
YYYY
Year: setting of time year